ROLAND VersaCAMM® SP-540i
- Product Code: SP-540i
- Availability: In Stock
Printing/cutting width (*1)
Maximum 1,346 mm (53 in.)
210 to 1,371 mm (8.3 to 54 in.)
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting Roll outer diameter Maximum 180 mm (7 in.) Roll weight Maximum 30 kg (66 lb.) Core diameter 50.8 mm or 76.2 mm (2 in. or 3 in.) Ink cartridges Type Exclusive ECO-SOL MAX™ INK cartridges Capacity Choose from 440 or 220 cc cartridges +/- 5 cc each Color Four colours - Cyan, Magenta, Yellow, Black Printing resolution Max. 1440 dpi Setting range for the heater temperature Pre-heater 30 to 50°C (86 to 122°F) Dryer 30 to 50°C (86 to 122°F) Distance accuracy (when cutting) (*3) Error of less than +/- 0.4% of distance traveled, or +/- 0.3 mm, whichever is greater. When distance correction ([CALBRATION] -[CUTTING ADJ.]) has been performed: error of less than +/- 0.2 % of distance preformed, or +/- 0.1mm, whichever is greater. Distance Accuracy (when printing) (*2)(*3) Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater Cutting Speed 10 to 300 mm/s Blade force 30 to 300 gf Blade offset compensation 0 to 1.5 mm (0 to 0.059 in) Software resolution (when cutting) 0.025 mm/step Repetition accuracy (when cutting)
(*3) (*4) 0.1 mm or less (excluding stretching/contraction of the media) Alignment accuracy for printing and cutting (*3) (*5) ±0.5 mm or less Alignment accuracy for printing and cutting when reloading media (*3) (*6) Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater Media heating system (*7) Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F)
Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F) Connectivity Ethernet (10 BASE-T / 100 BASE-TX, automatic switching) Power-saving function Automatic sleep feature (Compliant with the International ENERGY STAR Office Equipment Program) Power supply Voltage and frequency AC 100 to 120 V +/- 10% 50/60 Hz or AC 220 to 240 V +/- 10% 50/61 Hz Required power capacity 8.8 A (100 to 120 V) or 4.7 A (220 to 241V) Power consumption During operation Approx. 1,030 W Sleep mode Approx. 14 W Acoustic noise level During operation 64 dB (A) or less (according to ISO 7779) Standby mode 40 dB (A) or less (according to ISO 7779) Dimensions (with stand) 2,310 (W) x 740 (D) x 1,125 (H) mm [90.9 (W) x 29.1 (D) x 44.3 (H) in.] Weight (with stand) 112 kg (247 lb.) Environment Power on Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended],
Humidity: 35 to 80%RH (non-condensing) Power off
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-condensing)
Stand, power cord, blade, blade holder, media clamps, media flanges,
replacement blade for separating knife, cleaning kit, software RIP, and
user's manual, etc
*1 The length of printing or cutting is subject to the limitations of the program.
*2 Using Roland specified media, print travel of 1m, temperature: 25°C (77°F), humidity: 50%RH
*3 Not assured when the print heater or dryer is used.
*4 Using Roland specified media, loaded on the shaft,
[PREFEED] menu item must be set to "ENABLE," with 25mm or more for both
right and left margins and 35mm or more front margin, excluding
expansion or contraction of the media.
VP-540: Media 610mm wide or over and 4,000mm long. Media 610mm wide or less and 8,000mm long. VP-300: media 3,000mm long.
*5 Provided that media length is under 3,000 mm. Temperature: 25°C (77°F)
Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*6 Using Roland specified media, data size: 1,000 mm in
the media-feed direction, 1,346 mm (VP-540i and SP-540i) or 736 mm
(VP-300i and SP-300i) in the carriage-movement direction.
No lamination. Automatic detection of crop marks at 4 points when media is reloaded.
During cutting, [PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F)
Excludes the influence of misalignment, expansion or contraction of the media.
*7 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
The preset temperature may fail to be reached. depending on the ambient temperature and media width.